Formulation, preparation and in vitro - in vivo evaluation of compression-coated tablets for the colonic-specific release of ketoprofen

ABSTRACT The aim of this study was to formulate and prepare compression-coated tablets for colonic release (CR-tablets), and to evaluate the bioavailability of ketoprofen following the administration of a single dose from mini-tablets with immediate release (IR-tablets) compared to CR-tablets. CR-tablets were prepared based on time-controlled hydroxypropylmethylcellulose K100M inner compression-coating and pH-sensitive Eudragit® L 30D-55 outer film-coating. The clinical bioavailability study consisted of two periods, in which two formulations were administered to 6 volunteers, according to a randomized cross-over design. The apparent cumulative absorption amount of ketoprofen was estimated by plasma profile deconvolution. CR-tablets were able to delay ketoprofen's release. Compared to IR-tablets used as reference, for the CR-tablets the maximum plasma concentration (Cmax) was lower (4920.33±1626.71 ng/mL vs. 9549.50±2156.12 ng/mL for IR-tablets) and the time needed to reach Cmax (tmax) was 5.33±1.63 h for CR-tablets vs. 1.33±0.88 h for IR-tablets. In vitro-in vivo comparison of the apparent cumulative absorption amount of ketoprofen showed similar values for the two formulations. Therefore, the obtained pharmacokinetic parameters and the in vitro-in vivo comparison demonstrated the reliability of the developed pharmaceutical system and the fact that it is able to avoid the release of ketoprofen in the first part of the digestive tract.

Development and evaluation of a chronotherapeutic drug delivery system of torsemide / Desenvolvimento e avaliação de um sistema de entrega de drogas cronoterapêuticas de torsemida

The objective of this study was to prepare and evaluate chronotherapeutic drug delivery systems (ChrDDs) of torsemide. Compression coated tablets (CCT) containing torsemide in the core tablet were prepared by the compression coating technique with different grades of polyethylene oxide (PEO WSR 301 & 1105). The optimized formulations were characterised for tabletting parameters and drug polymer interaction by Fourier-Transform Infrared Spectroscopy (FTIR).The hardness of all the CCT using PEO WSR 301 & PEO WSR 1105 were in the range 6-8 kg/cm² & 5.5 to 7 kg/cm² respectively. Their friability values were <0.3 percent. All the CCT showed a clear lag time but finalized as per the predetermined lag time. As the amount of PEO was increased in the outer layer the drug released was delayed. The drug content of all the CCT was >99 percent. The FTIR studies showed no interaction throughout the process of development. Formulations of F7 and of P7 were considered optimized formulations since they yielded a predetermined lag time of 6h before burst release. Hence, these formulations can be exploited to achieve chronotherapeutic drug delivery systems of Torsemide for the treatment of hypertension at the time the patient needs it.

O objetivo deste estudo foi preparar e avaliar sistemas cronoterapêuticos de liberação de fármacos (ChrDDs) de torsemida. Comprimidos revestidos por compressão (CCT) contendo torsemida no (núcleo) foram preparados pela técnica de revestimento por compressão, com diferentes categorias de óxido de polietileno (PEO WSR 301 & 1105). As formulações otimizadas foram caracterizadas por parâmetros de compressão e interação fármaco polímero por Infravermelho com Transformada de Fourier (FTIR). A dureza dos CCT utilizando PEO WSR 301 e PEO WSR 1105 foi entre 6-8 kg/cm² e 5,5 a 7 kg/cm², respectivamente. Os valores de friabilidade foram <0,3 por cento. Todos os CCT mostraram claro tempo de retardo, mas finalizaram de acordo com o tempo de retardo pré-determinado. À medida que a quantidade de PEO aumentava na camada mais externa, a liberação do fármaco era retardada. O teor de fármaco em todos os CCT foi >99 por cento. Os estudos de FTIR mostraram que não h[a interação durante o processo de desenvolvimento. As formulações F7 e P7 foram consideradas otimizadas, uma vez que resultaram em tempo de retardo pré-determinado de 6 h antes da liberação por meio de explosão. Dessa forma, estas formulações podem ser exploradas para se obter sistemas de liberação.

Development and validation of dissolution method for carvedilol compression-coated tablets

The present study describes the development and validation of a dissolution method for carvedilol compression-coated tablets. Dissolution test was performed using a TDT-06T dissolution apparatus. Based on the physiological conditions of the body, 0.1N hydrochloric acid was used as dissolution medium and release was monitored for 2 hours to verify the immediate release pattern of the drug in acidic pH, followed by pH 6.8 in citric-phosphate buffer for 22 hours, to simulate a sustained release pattern in the intestine. Influences of rotation speed and surfactant concentration in medium were evaluated. Samples were analysed by validated UV visible spectrophotometric method at 286 nm. 1 percent sodium lauryl sulphate (SLS) was found to be optimum for improving carvedilol solubility in pH 6.8 citric-phosphate buffer. Analysis of variance showed no significant difference between the results obtained at 50 and 100 rpm. The discriminating dissolution method was successfully developed for carvedilol compression-coated tablets. The conditions that allowed dissolution determination were USP type I apparatus at 100 rpm, containing 1000 ml of 0.1N HCl for 2 hours, followed by pH 6.8 citric-phosphate buffer with 1 percent SLS for 22 hours at 37.0 ± 0.5 ºC. Samples were analysed by UV spectrophotometric method and validated as per ICH guidelines.

O presente estudo descreve o desenvolvimento e a validação de método de dissolução para comprimidos revestidos de carvedilol. O teste de dissolução foi efetuado utilizando-se o aparelho para dissolução TDT-06T. Com base nas condições fisiológicas do organismo, utilizou-se ácido clorídrico 0,1 N como meio de dissolução e a liberação foi monitorada por 2 horas para se verificar o padrão de liberação imediata do fármaco em condições de pH baixo, seguidas por pH 6,8 em tampão cítrico-fosfato por 22 horas, para simular o padrão de liberação controlada no intestino. Avaliou-se a influência da velocidade de rotação e a concentração de tensoativo no meio. As amostras foram analisadas por método espectrofotométrico UV-visível validado, em 286 nm. O laurilsulfato sódico a 1 por cento (SLS) mostrou-se ótimo para aumentar a solubilidade do carvedilol em pH 6,8 em tampão cítrico-fosfato. A análise da variância não mostrou diferença significativa entre os resultados obtidos a 50 e a 100 rpm. O método da dissolução discriminante foi desenvolvido com sucesso para os comprimidos revestidos de carvedilol. As condições que permitiram a determinação da dissolução foram: aparelho USP tipo I a 100 rpm, contendo 1000 mL de HCL 0,1 N por 2 horas, seguido de pH 6,8 com tampão cítrico-fosfato, com 1 por cento de SLS por 22 horas a 37,0 ± 0,5 ºC. Amostras foram analisadas por método espectrofotométrico e validadas pelas normas ICH.